A pair of left and right hand gearboxes complete with two 6 volt motors.

These motors & gearboxes are ready to bolt straight onto ZiBOT's chassis. The 3mm shaft has been trimmed and threaded to M3 for easy fitting of any wheel with a 3mm hub.

Hot Tip 1:
To ensure that ZiBOT's wheels never fall off fit a second nut over the nut holding the wheel on. Then tighten these two nuts against one another. This is known as a "lock nut" and will ensure that ZiBOT's wheels never come off!

Available from Tech-Supplies.

Tech Supplies no longer supply this motor but they do another very similar to this model with different mounts and motor (3-6V) they also do one with variable gearbox ratios.

Also check out Como Drills MFA.

 

HOME