SENSORS

 

 

Everything needed for ZiBOTs sensors
  • Screened cable for ultrasonic transducers
  • Hookup wire for LDR's
  • Two pairs of ultrasonic transducers
  • Two miniature LDR's
  • Four 2 pin plug sockets
  • Eight crimp pins for plug sockets

 

Ultrasonic Sensors usually come in matched pairs so don't mix them up.

The transmitter is usually marked with a "T" and the receiver with an "R".

Zibot transmits at 40KHz.

Available from Maplin Electronics.

 

The miniture LDR's (Light dependent Resistors).

Available from ESR Electronic Components Ltd.

 

 

HOME